Electro-Mechanical Engineering - Altoona

Starting and ending at Altoona / updated 3/18/2014

Semester 2 (Altoona)

Course DetailsCredits
3.0
CMPET 117 - Digital ElectronicsNotes for: CMPET 117

CMPET 117

Requirements for this course
  • * Course requires a grade of 'C' of better.*
3.0
CMPET 120 - Digital Electronics LaboratoryNotes for: CMPET 120

CMPET 120

Requirements for this course
  • * Course requires a grade of 'C' of better.*
1.0
ENGL 15 - Rhetoric and Composition (GWS)Notes for: ENGL 15

ENGL 15

If ENGL 030 is recommended by placement test results, it should be taken fall semester. If ENGL 015 is recommended by placement test results, it should be taken spring semester. Only one of these two courses can be taken.
Requirements for this course
  • † Course satisfies General Education and degree requirements.
3.0
MATH 082 - Technical Mathematics II (GQ)Notes for: MATH 082

MATH 082

Requirements for this course
  • * Course requires a grade of 'C' of better.*
3.0
MCHT 111 - Mechanics for Technology: StaticsNotes for: MCHT 111

MCHT 111

Requirements for this course
  • * Course requires a grade of 'C' of better.*
3.0
Total credits 16.0

Semester 3 (Altoona)

Course DetailsCredits
EET 114 - Electrical Circuits IINotes for: EET 114

EET 114

Requirements for this course
  • * Course requires a grade of 'C' of better.*
4.0
EET 118 - Electrical Circuits LaboratoryNotes for: EET 118

EET 118

Requirements for this course
  • * Course requires a grade of 'C' of better.*
1.0
2.0
EMET 222 - Mechanics for TechnologyNotes for: EMET 222

EMET 222

Requirements for this course
  • * Course requires a grade of 'C' of better.*
4.0
MATH 083 - Technical Calculus (GQ)Notes for: MATH 083

MATH 083

Requirements for this course
  • * Course requires a grade of 'C' of better.*
4.0
MCHT 214 - Strength and Properties of Materials LaboratoryNotes for: MCHT 214

MCHT 214

Requirements for this course
  • * Course requires a grade of 'C' of better.*
1.0
Total credits 16.0

Semester 4 (Altoona)

Course DetailsCredits
EET 212W - Op Amp and Integrated Circuit ElectronicsNotes for: EET 212W

EET 212W

Requirements for this course
  • * Course requires a grade of 'C' of better.*
4.0
3.0
2.0
2.0
MATH 210 - Calculus with Engineering Technology Applications (GQ)Notes for: MATH 210

MATH 210

Requirements for this course
  • * Course requires a grade of 'C' of better.*
3.0
Natural Science Course (GN)
3.0
Total credits 17.0

Semester 5 (Altoona)

Course DetailsCredits
3.0
3.0
EMET 230 - Computerized I/O SystemsNotes for: EMET 230

EMET 230

Requirements for this course
  • * Course requires a grade of 'C' of better.*
3.0
ENGL 202C - Effective Writing: Technical Writing (GWS)Notes for: ENGL 202C

ENGL 202C

Requirements for this course
  • † Course satisfies General Education and degree requirements.
3.0
MATH 211 - Intermediate Calculus and Differential Equations with Applications (GQ)Notes for: MATH 211

MATH 211

Requirements for this course
  • * Course requires a grade of 'C' of better.*
3.0
Natural Science Course (GN)
3.0
Total credits 18.0

Semester 6 (Altoona)

Course DetailsCredits
3.0
3.0
EMET 330 - Measurement Theory and InstrumentationNotes for: EMET 330

EMET 330

Requirements for this course
  • * Course requires a grade of 'C' of better.*
3.0
3.0
Natural Science Course (GN)
3.0
3.0
Total credits 18.0

Additional Notes

Sequential Nature of the Program:

Courses offered during each semester of the EMET program generally build upon material taught in previous semesters.  Many courses have prerequisites listed in the Undergraduate Degree Programs Bulletin.  Therefore, if a student fails to take a course during the targeted semester, he/she may be unable to schedule courses in subsequent semesters as well.  The end result may be a degree program that extends beyond the traditional four years. 

 

Note 1: Math Sequence

High school graduates who test into technical mathematics: Math 81, 82, 83, 210 and 211.  Additionally, Math 40 or Math 22 and Math 26 may be used to substitute for Math 81 and 82. 

High school graduates who test into calculus: Math 83, 210 and 211 or Math 140, 141, and 250.  Students who complete either of these sequences to fulfill the math requirements will need to complete additional technical elective credits.  Please see an advisor for more information.

 

Note 2: Science Courses

Students are required to complete nine credits of science.  At least two courses from the following list must be completed:

  • PHYS 150 GN(3) or PHYS 211 GN(4) or PHYS 250 GN(4);
  • PHYS 151 GN(3) or PHYS 212 GN(4) or PHYS 251 GN(4);
  • CHEM 110 GN(3) and CHEM 111 GN(1);

Students may complete no more than one selection from the following.  (If the student completes three selections from the first list, no additional courses are required):

  • BIOL 011 GN(3) and BIOL 012 GN(1);
  • BIOL 110 GN(4);
  • BIOL 141 GN(3);
  • CHEM 112 GN(3) and CHEM 113 GN(1);
  • EGEE 101 GN(3);
  • EGEE 102 GN(3);

 

Note 3: US/IL Requirements for GS/GH/GA Courses

Baccalaureate degree students are required to complete six credits in each of three general education areas:  Social Sciences (GS), Humanities (GH), and Arts (GA).  Of these eighteen credits, one three-credit course in United States Cultures (US) and one three-credit course in International Cultures (IL) must be taken to satisfy general education requirements.  If a course is identified as both US and IL, it will have the USI designation and can be substituted for either the US or the IL; but not both.  Additionally, students must select three credits of GH or GS from the following courses: STS 200 (GS), STS 233 (GH), or STS 245 (GS,IL)

 

Note 4:  Courses taught only one semester per year

Due to limited faculty resources, several program courses are only offered during one semester of the year.  In addition, EMET courses are not traditionally offered during the summer months.

 

Note 5: Writing Intensive Course

W is the code used to designate courses that satisfy University Writing Across the Curriculum requirements.

 

Note 6: Technical Elective Courses

Approved technical elective courses are:

  • CMPSC 201C (3) or CMPSC 121 (3);
  • EMET 401 (1), EMET 402 (2), EMET 403 (1), EMET 394 (1-3), EMET 430 (3),
  • ENTR 300 (3), ENTR 320 (3),
  • MATH 220 (2), MATH 231 (2), STAT 200 (4)
  • MGMT 301 (3), MKTG 301 (3)

Other courses may be accepted toward technical elective credits.  Please check with your advisor for more information.

 

Legend

# Course is an Entrance-to-Major requirement.
* Course requires a grade of 'C' or better.
† Course satisfies General Education and degree requirements.

Footnotes

ENGL 15
If ENGL 030 is recommended by placement test results, it should be taken fall semester. If ENGL 015 is recommended by placement test results, it should be taken spring semester. Only one of these two courses can be taken.